Beta Star Model 500 Sterilizer Control  

Your Benefits

  • ACCURATE DOCUMENTATION FOR EACH RUN - A 20 column alpha/numeric dot matrix impact printer for a detailed hard copy print out that contains: date, all set points, cycle, time of cycle start, phases and elapsed time during phases, real time at the change of a phase, pertinent process values, all alarms in real time, and a complete summary at the end of a cycle. One or two copy paper available, one for immediate use and one is rolled up internally for back up.
  • USER FRIENDLY - Two button operation
  • MODULAR DESIGN (5 P.C. BOARDS) - Control serviceable from front of unit
  • EXCEEDS AAMI STANDARDS FOR HEALTH CARE FACILITIES USE
  • MEETS GLP AND CGMP LEVEL FOR PHARMACEUTICAL APPLICATIONS
  • CYCLE CONTROL - Drain Sensor, Load Probe, and F0 Cycle time control
  • AUTOMATIC UTILITY SHUT DOWN
  • NINE OR MORE PRE-PROGRAMMED OR PROGRAMMABLE CYCLES -
  • Fabrics, Solid, Liquids, Flash, Shoebox, Bio Hazardous, Gravity, Media, etc.
  • PROGRAM / RUN KEY - Allows only authorized personnel to modify the setpoints of each of the preprogrammed cycles.
  • TOUCH PAD CONTROL PANEL - For ease of programming or operating a cycle.
  • TWO 20 CHARACTER ALPHA/NUMERIC DISPLAY - Displays all the
  • pertinent cycle parameters throughout the process (cycle type, process values, setpoints, alarms, phases, etc.)
  • BATTERY BACK UP OF RAM - Maintains all user programmed set points for 30 days without power.
  • A SIGNAL CONDITIONING BOARD - For temperature transmitters and pressure tranducer with its own power supply.
  • A 12 POSITION SOLID STATE RELAY (SSR) BOARD - Individual LED indicators, plug in SSRs, terminals for all the inputs and outputs, main power on/off circuit breaker, and main power SSR.
  • Control System is validatedable.
  • Low cost custome design available.
  • Validated software available

 

Beta Star Model 500

GENERAL DESCRIPTION

     Beta Star has been supplying sterilizers and controls to the sterilization industry for over 15 years.

     The Beta Star Model 500 is a microcomputer sterilization controller designed to meet the stringent requirements necessary for consistent, reliable cycle control with accurate recording of pertinent data.

     Numerous processes are available: General Purpose - Pulse Vacuum - High Vacuum - Laboratory - Low Temperature - Surgical - High Vacuum Flash - EO Gas - Combination Washer / Sterilizer