Small size, small capacity Sussman MBA Electric Steam Generators are perfect for applications requiring efficient, high quality steam in laboratories, hospitals, pilot plants and for small, intermittent, low-steam consuming loads.

These generators can be used for standby operations in off-seasons or when a larger boiler is shut down or unavailable. The automatic electronic liquid level controller meets all UL and ASME requirements. A main waterline pressure 10 psig greater than the operating pressure of the steam generator is required for automatic water feeding.

All MBA steam generators are factory tested and are ready to operate.

SUSSMAN MBA Series Features:

• Safe easy-to-use heat source - no on-site products of combustion.
• Easy and quick to install, they require only a water feed connection and electrical hook-up.
• Steam available at the flip of a switch.
• Applications include: Laboratory use, steam for small tanks, reactions and distillations, autoclaves, food products, jacketed vessels for processing waxes, paraffins, glues, resins and varnishes and woodbending.
• Built in accordance with Section I Code M of ASME Boiler and Pressure Vessel Codes,to 100PSIG trim.
• UL Listed and CSA Certified.

STANDARD FEATURES

• LIQUID LEVEL / LOW WATER CONTROL
  The electronic control automatically maintains proper water level, and shuts off the generator when water supply in the boiler drops below a safe operating level.
  
• WATER LEVEL SIGHT GLASS
  Allows constant observation of water level while boiler is in operation
  
• ON-OFF SWITCH
  Complete with pilot light, for switching the generator on and off.
  
• INTEGRAL ELECTRICAL CONTROL
  Magnetic contactor energizes the element and is integrally mounted in the control unit.
  
• BLOWDOWN/DRAIN VALVE
  Facilitates emptying the pressure vessel during blowdown/ drain sequence.
  
• STEAM OUTLET VALVE
  Provides easy control of steam.
  
• LONG LIFE HEATING ELEMENTS
  Industrial grade, heavy duty stainless steel heating elements equipped with one piece resistance welded terminations for added strength and safety.
  
• OPERATING PRESSURE CONTROL
  Operates automatically to maintain steam pressure within generator.
  
• MANUAL RESET PRESSURE CONTROL
  Provides high limit pressure cut-out with manual reset.
  
• STEAM SAFETY VALVE
  ASME Code valve, automatically opens to reduce pressure should excessive steam cause pressure build-up.
  
• STEAM PRESSURE GAUGE
  Allows visual observation of steam pressure over full range.
  
• ENERGY SAVING AND MINIMUM MAINTENANCE
  Fully insulated pressure vessel minimizes heat loss and maximizes energy savings.
  
• EASY CONTROL MAINTENANCE
  All controls and components are easily accessible. Fully-louvered openings avoid component heat build-up.
  
• RUGGED CONSTRUCTION
  Performance is insured for all typical industrial applications.

MEETING CODE REQUIREMENTS

• Pressure vessel rated at 100 psig to ASME Section I, Code M and National Board registered.
  
• UL listed, CSA certified, built to NEC.
• All units are physically identical and have a packed shipping weight of 125LBS.
  
• Units are trimmed at 100PSIG as standard. Lower trims are available.
  
• Incoming water line pressure must be 10 PSIG greater than generator operating pressure. If not, a motor/pump must be used. Specify Sussman 38002A high pressure feedwater motor/pump system.
  
• When ordering: Specify Model No., KW, volts/ph and motor/pump, if required.
  
• Water Connection is 1/4 NPT. Steam outlet is 1/2 NPT.
  

Suitable for industries requiring efficient, high quality saturated steam, including laboratories, hospitals, industrial plants, pilot plants, food and chemical processing applications.

These versatile generators are perfect for almost any application requiring steam from 0-150 PSIG. Each unit is complete with automatic features, including pressure and liquid level controllers, ASME Code pressure vessel and safety valve and are fully tested under power. Each one must pass Sussman's rigid quality control inspection before it is shipped.

Sussman Electric Boilers - your source for fast economical steam energy.

ES SERIES FEATURES:

• Safe easy -to-use heat source - No on-site products of combustion.
• Easy, quick to install, they require only a water feed connection and electrical hook-up.
• Applications include: Steam for tanks, reactors, distillations, autoclaves, dyestuffs, food products, cosmetics, paraffins, glues, resins, varnishes, sterilizers, pipe tracing and humidification.
• Built to Section I, of ASME Boiler and Pressure Vessel Codes - UL listed and CSA certified.

STANDARD FEATURES:

• LOW WATER CUT-OFF/LEVEL CONTROL
  A McDonnell Miller #150 control automatically maintains proper water level, shutting off the boiler when water supply in the boiler drops below a safe operating level.
• WATER LEVEL SIGHT GLASS
  Allows constant observation of water level while boiler is in operation
• MAIN ON/OFF SWITCH
  Allows manual operation of the boiler operation control circuit.
• PILOT LIGHT
  Indicates the boiler's on/off condition.
• INTEGRAL POWER CONTACTORS
  Magnetic contactors for energizing the boiler elements. Integrally mounted in the control unit.
• BLOWDOWN/DRAIN VALVES
  Facilitates emptying the boiler pressure vessel and MM150 water column piping during blowdown sequence.
• LONG LIFE HEATING ELEMENTS
  Industrial grade. heavy duty 0.420" diameter stainless steel heating elements equipped with one piece resistance welded terminations for added strength and safety.
• OPERATING PRESSURE CONTROL
  Resets to maintain preset pressure within boiler.
• ENERGY SAVINGS AND MINIMUM MAINTENANCE
  Pressure vessel insulation; minimum heat loss and maximum energy savings is insured by fibrous glass material
• EASY CONTROL MAINTENANCE
  All control panels and components are easily accessible. Fully-louvered openings avoid component heat build-up
• RUGGED CONSTRUCTION
  Performance is insured for all typical industrial applications.

MEETING CODE REQUIREMENTS

• Pressure vessel rated at 100 PSIG to ASME Section 1, Code M. Vessel National Board Registered. Sect 1, Code to 150 PSIG rating available.
• UL Listed. Canadian Standards Association Approved.
• All electrical construction conforms to NEC standards.

SAFETY FEATURES

• STEAM SAFETY VALVE
  Automatically opens to reduce pressure should excessive steam cause pressure build-up.
• STEAM PRESSURE GAUGE
  Allows visual observation of steam pressure over full range
• MANUAL RESET PRESSURE CONTROL
  Provides high limit pressure cut-out with manual reset.

STANDARD OPTIONAL EQUIPMENT

A complete complement of optional equipment for ES and other Sussman steam boilers is described in Sussman Product Sheet OES. Options covered are water feed systems, condensate returns, progressive sequencers, automatic blowdown systems, blowdown separators and transformers.